- Epoxy Floor Paint
- Single Pack Floor Paint
- Preparation, Finishing & Aftercare
- Floor Paint Applications
- Floor Paint Colours
- Brunswick Green Floor Paints
- Ford Tractor Blue Floor Paints
- Cornflower Blue Floor Paints
- Red Oxide Floor Paints
- Post Office Red Floor Paints
- Caterpillar Yellow Floor Paints
- JCB Yellow Floor Paints
- Chocolate Brown Floor Paints
- Bright Orange Floor Paints
- Slate Grey Floor Paints
- Light Grey Industrial Floor Paints
- White Floor Paints
- Black Industrial Floor Paints
Catteries Paint – It’s important to select the proper paint for protecting your cattery floor and wall surfaces – using the right product for the job will make it far easier to keep surfaces hygienic, protected and looking neat and tidy in long-term everyday use. Choosing the wrong type of paint for the job can result in the need for constant maintenance and upkeep jobs that will quickly become expensive over time. We recommend using epoxy floor paint in your cattery. The properties of epoxy-coatings give good acid and alkali resistance, therefore meaning that cat urine is less likely to attack the paint. Our cattery paint range is easy to apply and offers superior protection against the continual washing and hosing down of surfaces. Enhanced resistance to fluid penetration helps to ensure that all areas and surfaces remain safely hygienic for both animals and staff alike.
High Build Epoxy Garage Floor Paint
Two Pack High Build Epoxy Garage Floor Paint – Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle / trucks).
– Coverage: 5-7 m² per litre
– Touch Drying Time: 12-16 hrs
– Recoat: 24 hrs
– Hard Drying Time: 48 hrs
– Full Cure: 7 days
Select options
This product has multiple variants. The options may be chosen on the product page
Two Pack Epoxy Floor Paint (Top Coat)
Two Pack Epoxy Floor Paint (Top Coat) – This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks).
Following application of the product:
Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours
Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration)
– Coverage: 5-7 m² per litre
– Touch Drying Time: 12-16 hrs
– Recoat: 24 hrs
– Hard Drying Time:48 hrs
– Full Cure: 7 days
Select options
This product has multiple variants. The options may be chosen on the product page
Two-Pack Epoxy Floor Sealer (First Coat)
Two-Pack Epoxy Floor Sealer (Under Coat) – This epoxy floor paint (first coat) is designed to prepare the surface of concrete, cement and non ferrous metals. This gives an ideal base for epoxy topcoat or acts as a seal coat for bare concrete floors. Resistant to water, solvents, acids, alkalis and salts. Tough finish, and has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks).
Following application of the product:
Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours
Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration)
– Coverage: 5-7 m² per litre
– Touch Drying Time: 12-16 hrs
– Recoat: 24 hrs
– Hard Drying Time: 48 hrs
– Full Cure: 7 days
Select options
This product has multiple variants. The options may be chosen on the product page
