- Epoxy Floor Paint
- Single Pack Floor Paint
- Preparation, Finishing & Aftercare
- Floor Paint Applications
- Floor Paint Colours
- Brunswick Green Floor Paints
- Ford Tractor Blue Floor Paints
- Cornflower Blue Floor Paints
- Red Oxide Floor Paints
- Post Office Red Floor Paints
- Caterpillar Yellow Floor Paints
- JCB Yellow Floor Paints
- Chocolate Brown Floor Paints
- Bright Orange Floor Paints
- Slate Grey Floor Paints
- Light Grey Industrial Floor Paints
- White Floor Paints
- Black Industrial Floor Paints
Storage Room Paint – Let’s face it, storage spaces can quickly start to look shabby – particularly in high traffic areas that are only ever used fleetingly. Even so, keeping these key areas looking shipshape can have a real impact on the smooth running of almost any business, workshop or studio. Regal Paint provides a number of storage room floor paint solutions that will ensure your backroom spaces continue to look clean, well maintained and businesslike, as well as offering a degree of valuable protection in the likely event of accidental drops, scuffs and spillages.
Two Pack Epoxy Floor Paint (Top Coat)
Two Pack Epoxy Floor Paint (Top Coat) – This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks).
Following application of the product:
Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours
Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration)
– Coverage: 5-7 m² per litre
– Touch Drying Time: 12-16 hrs
– Recoat: 24 hrs
– Hard Drying Time:48 hrs
– Full Cure: 7 days
Select options
This product has multiple variants. The options may be chosen on the product page
Two-Pack Epoxy Floor Sealer (First Coat)
Two-Pack Epoxy Floor Sealer (Under Coat) – This epoxy floor paint (first coat) is designed to prepare the surface of concrete, cement and non ferrous metals. This gives an ideal base for epoxy topcoat or acts as a seal coat for bare concrete floors. Resistant to water, solvents, acids, alkalis and salts. Tough finish, and has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks).
Following application of the product:
Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours
Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration)
– Coverage: 5-7 m² per litre
– Touch Drying Time: 12-16 hrs
– Recoat: 24 hrs
– Hard Drying Time: 48 hrs
– Full Cure: 7 days
Select options
This product has multiple variants. The options may be chosen on the product page
