Football Stadium Paint

The client needed a concrete floor paint for a Premiership Football Club. Grey Two-Pack Epoxy Floor Paint was required, along with a non-slip overcoating finish.

Specialist Floor Paint

PROJECT BRIEF: SUPPLY A NON-SLIP, HARD WEARING FLOOR FOR A FOOTBALL STADIUM

Our Client Asked:-

“Further to my call earlier this week, I confirm I will ask our client to send to you a small piece of Durbar Plate for you to apply a 2mm thickness to. Our engineer has approved the loading on the durbar plate.

Could you please confirm the specification of the epoxy and the non slip floor paint to be used on the existing painted surface of the precast steppings which are in good condition but 12 years old and the new seat row comprising of the epoxy on the durbar with an overcoating of non-slip paint.

The RAL colour for the finish surface is required as RAL 7004 with step edges highlighted in RAL 7012.”

Product Chosen: Regal Clean ‘N Etch

Regal Clean n Etch ensures the top surface of the concrete is clean and free of latents and porous enough to ensure penetration for the first coat of paint.

Hot
Two Pack Epoxy Floor Paint (Top Coat)
Two Pack Epoxy Floor Paint (Top Coat)
Add to compare

Two Pack Epoxy Floor Paint (Top Coat)

, , , ,
Price range: £52.50 through £158.50 ex VAT
Two Pack Epoxy Floor Paint (Top Coat) - This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Two Pack Epoxy Floor Sealer (First Coat)
Two-Pack Epoxy Floor Sealer (First Coat)
Add to compare

Two-Pack Epoxy Floor Sealer (First Coat)

, , , ,
Price range: £44.00 through £122.50 ex VAT
Two-Pack Epoxy Floor Sealer (Under Coat) - This epoxy floor paint (first coat) is designed to prepare the surface of concrete, cement and non ferrous metals. This gives an ideal base for epoxy topcoat or acts as a seal coat for bare concrete floors. Resistant to water, solvents, acids, alkalis and salts. Tough finish, and has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
Add to wishlist
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

*In addition, the client required a bespoke anti-slip surface which was formulated according to their specifications for overcoating the two-pack epoxy painted floor.

If you have bespoke requirements, please contact us and we will be happy to discuss your project needs.