Showing all 10 results

Antislip Quick Dry Concrete Floor Paint

£34.50£85.50 ex VAT
Anti Slip Quick Dry Concrete Floor Paint is a made with the addition of a wax additive to give more slip resistance to your floor. This is a single pack paint (does not need an activator) and gives protection against solvent, salt and water damage. Having good durability and impact resistance, it is suitable for use in heavy duty commercial and industrial areas. – Coverage: 5-10 m² per litre – Touch Drying Time: 3-6 hours – Recoat: 24 hours – Hard Drying Time: 48 hours  
Select options This product has multiple variants. The options may be chosen on the product page

High Build Epoxy Garage Floor Paint

£52.50£158.50 ex VAT
Two Pack High Build Epoxy Garage Floor Paint - Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle / trucks). - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
Select options This product has multiple variants. The options may be chosen on the product page

Polyurethane Concrete Floor Paint

£31.50£82.00 ex VAT
Polyurethane Concrete Floor Paint - A single pack high build floor coating giving medium durability against abrasion and impact, with limited protection against solvent, salt and water damage. Polyurethane Concrete Floor Paint is easy to apply with a gloss or semi-gloss finish. Suitable for light commercial and industrial areas.
Select options This product has multiple variants. The options may be chosen on the product page

Quick Dry High Build Floor Paint

£34.50£87.00 ex VAT
Quick Dry High Build Floor Paint - A single pack quick dry floor coating which provides good durability against abrasion and impact along with with protection against solvent, salt and water damage. Very easy to apply. Suitable for heavy duty commercial and industrial areas.
Select options This product has multiple variants. The options may be chosen on the product page

Two Pack Epoxy Floor Paint (Top Coat)

£52.50£158.50 ex VAT
Two Pack Epoxy Floor Paint (Top Coat) - This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
Select options This product has multiple variants. The options may be chosen on the product page

Two Pack Epoxy Floor Paint Test (Top Coat)

£52.50£158.50 ex VAT
Two Pack Epoxy Floor Paint (Top Coat) - This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time:48 hrs - Full Cure: 7 days
Select options This product has multiple variants. The options may be chosen on the product page

Two-Pack Epoxy Floor Sealer (First Coat)

£44.00£122.50 ex VAT
Two-Pack Epoxy Floor Sealer (Under Coat) - This epoxy floor paint (first coat) is designed to prepare the surface of concrete, cement and non ferrous metals. This gives an ideal base for epoxy topcoat or acts as a seal coat for bare concrete floors. Resistant to water, solvents, acids, alkalis and salts. Tough finish, and has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks). Following application of the product: Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration) - Coverage: 5-7 m² per litre - Touch Drying Time: 12-16 hrs - Recoat: 24 hrs - Hard Drying Time: 48 hrs - Full Cure: 7 days
Select options This product has multiple variants. The options may be chosen on the product page

Regal Prime and Seal

£32.50£67.50 ex VAT
Floor Primer made to use in conjunction with any of the Regal single pack topcoat floor paints. Not suitable for use with our epoxy topcoat floor paint. Regal Prime and Seal is a single pack, quick drying, low viscosity, penetrating first-coat floor primer. Designed to soak into the substrate, it enhances adhesion of subsequent top coats by acting as an anchor layer between the substrate and floor paint. Regal Prime and Seal dries with a flat finish. The colour is non specific. - Coverage: 5-10 m² per litre - Touch Drying Time: 2-4 hours - Recoat: 24 hours - Hard Drying Time: 24 hours You might be thinking does floor paint need primer? Please read our information page 'what does floor primer do?'.
Select options This product has multiple variants. The options may be chosen on the product page

Pumice Aggregate

£6.00£18.50 ex VAT
Pumice aggregate is an extremely lightweight natural material which is mixed into the paint prior to application. It gives a rough-profiled finish and significantly increases slip resistance. When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. Apply the paint with a roller to achieve a consistent finish. A natural stone alternative to plastic microbeads.
Select options This product has multiple variants. The options may be chosen on the product page

SuperTough Aggregate

£7.00£21.50 ex VAT
SuperTough Aggregate is an iron-silicate grit. With much larger particles than our Pumice Aggregate, it has a hard, sharp finish to give fantastic grip when used in conjunction with our floor paints. To use SuperTough Aggregate, firstly apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, use a soft brush to remove the excess SuperTough Aggregate that hasn’t stuck. Then paint over the whole surface of the floor again to seal the grit in place on the floor.  
Select options This product has multiple variants. The options may be chosen on the product page

Concrete Floor Paint

Are you looking to paint a concrete or cement floor? As industrial floor paint manufacturers, we continually make a range of the best concrete floor paints for you to choose from.

Designed to protect the substrate and enhance the appearance of the floor, choosing a suitable coating for concrete surfaces is vital.

By choosing the right type of paint and properly preparing and maintaining the surface, concrete floors can be transformed into durable, attractive, and long-lasting surfaces.

Our range includes polyurethane, anti slip, quick drying, and epoxy floor paints.

Do you need help or technical advice?

It can be difficult to choose if you are not familiar with the technical aspects of the products. If you need any help, we do have informative blog posts available in the help and advice section of the website. We are also always happy to provide all the assistance you need over the phone, so please don’t hesitate to call us on 01782 550733.