- Epoxy Floor Paint
- Single Pack Floor Paint
- Preparation, Finishing
& Aftercare - Floor Paint Applications
- Floor Paint Colours
- Brunswick Green Floor Paints
- Ford Tractor Blue Floor Paints
- Cornflower Blue Floor Paints
- Red Oxide Floor Paints
- Post Office Red Floor Paints
- Caterpillar Yellow Floor Paints
- JCB Yellow Floor Paints
- Chocolate Brown Floor Paints
- Bright Orange Floor Paints
- Slate Grey Floor Paints
- Light Grey Industrial Floor Paints
- White Floor Paints
- Black Industrial Floor Paints
Hot
Two-Pack Epoxy Floor Sealer (First Coat)
£44.00 – £122.50 ex VAT
Plywood Paint / MDF Paint
£35.00 – £93.00 ex VAT
Two Pack Epoxy Floor Paint (Top Coat)
£52.50 – £158.50 ex VAT
Two Pack Epoxy Floor Paint (Top Coat) – This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks).
Following application of the product:
Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours
Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration)
– Coverage: 5-7 m² per litre
– Touch Drying Time: 12-16 hrs
– Recoat: 24 hrs
– Hard Drying Time:48 hrs
– Full Cure: 7 days
Description
[block id=”47035″]
BULK ORDERS? CALL 01782 550733 FOR DISCOUNTS!
Available Floor Paint Colours
*The colours of floor paints shown in this chart are approximate and may vary.
Two Pack Epoxy Floor Paint (Top Coat) – Product Description & Recommended Use
- Economical long-term protection in demanding conditions.
- An incredibly durable floor paint, hard-wearing with excellent resistance to water, solvents, acids, alkalis and salts.
- Excellent cross-linking with Regal 2-Pack Epoxy Floor Sealer (First Coat).
- Trouble-free application by roller or brush.
- Recommended for heavy-duty commercial and industrial areas.
- Ideal for areas that will be receiving heavy traffic such as vehicles and trucks.
Designed for application to concrete and non ferrous metals, Regal 2-Pack Epoxy Floor Paint (Top Coat) is the second coat in the Regal 2-Pack Epoxy Flooring System.
Regal 2-Pack Epoxy Floor Paint (Top Coat) is an incredibly durable and hard-wearing floor paint, making it ideal for use on areas that will be receiving heavy traffic, such as vehicles and trucks. It gives excellent protection against water, solvents, acids, alkalis and salts.
A tough finish and long-lasting abrasion and impact resistance.
PRODUCT NAME
Two Pack Epoxy Floor Paint (Top Coat)
PRODUCT DATA SHEET
Technical Details
[row]
[col span__sm=”12″]
[message_box text_color=”light” padding=”10″]
[row_inner v_align=”middle” h_align=”center”]
[col_inner span=”8″ span__sm=”12″]
Two Pack Epoxy Floor Paint (Top Coat) Reviews
[/col_inner]
[col_inner span=”4″ span__sm=”12″ align=”right”]
[button text=”READ REVIEWS / LEAVE FEEDBACK” color=”white” style=”outline” expand=”0″ link=”https://regalmetalpaint.co.uk/two-pack-epoxy-floor-paint-top-coat-reviews/”]
[/col_inner]
[/row_inner]
[/message_box]
[/col]
[/row]
[row]
[col span__sm=”12″]
[ux_pages parent=”4699″ type=”slider” columns=”6″ image_height=”50%” text_align=”center” text_size=”xsmall”]
[block id=”24813″]
[/col]
[/row]
Additional information
Shipping & Delivery
You may also like…
Nylon Bonded Roller Refills
Black-Stripe Nylon material is heat-bonded to the nylon core in manufacture. Ideal for painting floors, the nylon core is solvent resistant and the Nylon fabric is virtually fluff-free in use. This makes this type of roller refill ideal for use with epoxy resin floor paint and other solvent based coatings that would pull fluff from or disolve most other roller refills. Available in four sizes: 9", 12", 15" & 18" wide.
Steel Roller Frames
Steel Roller Frames - These floor roller frames are made from high strength galvanised steel, and available in 9" (Alloy), 12", 15" & 18". The Roller frame bar is secured with a split-pin allowing easy removal.
Related products
Antislip Quick Dry Concrete Floor Paint
Anti Slip Quick Dry Concrete Floor Paint is a made with the addition of a wax additive to give more slip resistance to your floor. This is a single pack paint (does not need an activator) and gives protection against solvent, salt and water damage. Having good durability and impact resistance, it is suitable for use in heavy duty commercial and industrial areas.
– Coverage: 5-10 m² per litre
– Touch Drying Time: 3-6 hours
– Recoat: 24 hours
– Hard Drying Time: 48 hours
High Build Epoxy Garage Floor Paint
Two Pack High Build Epoxy Garage Floor Paint - Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle / trucks).
- Coverage: 5-7 m² per litre
- Touch Drying Time: 12-16 hrs
- Recoat: 24 hrs
- Hard Drying Time: 48 hrs
- Full Cure: 7 days
Line Marking Paint
Line Marking Paint - A quick drying floor paint used to mark out safe zones, work areas, walkways, hazard areas etc on your floor. A durable coating with good resistance to abrasion and impact along with with protection against solvent, salt and water damage. Ideally suited to factory floors, warehouses, service garages, car parks and other industrial areas where long lasting and clearly visible markings are required. Available in five colours.
One Coat High Build Steel Enamel
One Coat High Build Steel Enamel - A tough long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Eliminates the need for two coats and cuts the drying time between coat, reducing labour and paint costs. This protects against corrosion and impacts.
- Coverage: 5-10 m2 per litre
- Touch Drying Time: 3-6 hours
- Recoat: 16 hours
- Hard Drying Time: 48 hours
Two Pack Epoxy Floor Paint Bundle 5 Litres
Two Pack Epoxy Floor Paint Bundle 5 Litres - The two pack epoxy floor bundle is designed for heavy use commercial industrial areas or on flooring areas that require a low maintenance long lasting finish. The key advantages over a single pack product are greater resistance to impact and abrasion, also a much greater protection from chemical, acid and alkalis spills. A single pack floor paint may require annual maintenance to ensure high wear points don't erode however epoxy coatings should last for a number of years.
Bundle includes 3 x 5 litre products:
1 x 5 lts two pack epoxy floor sealer
1 x 5 lts two pack epoxy floor paint top coat
1 x 5 lts Regal Clear Finish
Two-Pack Epoxy Metal Enamel (Top Coat)
A two-Pack (or two-part) epoxy paint for metal, a topcoat enamel which is designed to be used in conjunction with Regal epoxy primer for application to most metal substrates. This epoxy metal paint has excellent durability and impact resistance. Offers protection from solvents, acids, alkalis and salts.
- Coverage: 5-10 m² per litre
- Touch Drying Time: 12 hrs
- Recoat: 24 hrs
- Hard Drying Time:48 hrs
- Full Cure: 7 days
Two-Pack Epoxy Metal Primer (First Coat)
Two-Pack Epoxy Metal Primer - Designed for a wide range of metal substrates, our two pack epoxy primer offers excellent durability and resistance to contact with solvents, acids, alkalis and salts. It’s hardwearing surface gives good protection against corrosion due to it’s phosphate content. Two-Pack Epoxy Metal Primer is suitable for galvanised steel and aluminium.
- Coverage: 5-10 m² per litre
- Touch Drying Time: 12 hrs
- Recoat: 24 hrs
- Hard Drying Time: 48 hrs
- Full Cure: 7 days
SuperTough Aggregate
Floor Paint, Anti-Slip Floor Paint, High Build Floor Paint, Concrete Floor Paint, Epoxy Floor Paint, Garage Floor Paint, Tools and Extras, Anti Slip Additives
SuperTough Aggregate is an iron-silicate grit. With much larger particles than our Pumice Aggregate, it has a hard, sharp finish to give fantastic grip when used in conjunction with our floor paints.
To use SuperTough Aggregate, firstly apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, use a soft brush to remove the excess SuperTough Aggregate that hasn’t stuck. Then paint over the whole surface of the floor again to seal the grit in place on the floor.
