High Build Floor Paint
Line Marking Paint
Line Marking Paint - A quick drying floor paint used to mark out safe zones, work areas, walkways, hazard areas etc on your floor. A durable coating with good resistance to abrasion and impact along with with protection against solvent, salt and water damage. Ideally suited to factory floors, warehouses, service garages, car parks and other industrial areas where long lasting and clearly visible markings are required. Available in five colours.
Select options
This product has multiple variants. The options may be chosen on the product page
Quick Dry High Build Floor Paint
Quick Dry High Build Floor Paint - A single pack quick dry floor coating which provides good durability against abrasion and impact along with with protection against solvent, salt and water damage. Very easy to apply. Suitable for heavy duty commercial and industrial areas.
Select options
This product has multiple variants. The options may be chosen on the product page
Pumice Aggregate
Floor Paint, Anti-Slip Floor Paint, Concrete Floor Paint, Epoxy Floor Paint, Garage Floor Paint, High Build Floor Paint, Metal Top Coat Paint, Anti Slip Additives, One Coat Paint, Tools and Extras
Pumice aggregate is an extremely lightweight natural material which is mixed into the paint prior to application.
It gives a rough-profiled finish and significantly increases slip resistance.
When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. Apply the paint with a roller to achieve a consistent finish.
A natural stone alternative to plastic microbeads.
Select options
This product has multiple variants. The options may be chosen on the product page
SuperTough Aggregate
Floor Paint, Anti-Slip Floor Paint, Concrete Floor Paint, Epoxy Floor Paint, Garage Floor Paint, High Build Floor Paint, Anti Slip Additives, Tools and Extras
SuperTough Aggregate is an iron-silicate grit. With much larger particles than our Pumice Aggregate, it has a hard, sharp finish to give fantastic grip when used in conjunction with our floor paints.
To use SuperTough Aggregate, firstly apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, use a soft brush to remove the excess SuperTough Aggregate that hasn’t stuck. Then paint over the whole surface of the floor again to seal the grit in place on the floor.
Select options
This product has multiple variants. The options may be chosen on the product page
