Regal Prime and Seal
£32.50 – £67.50 ex VAT
Quick Drying Gloss Enamel
£34.50 – £82.00 ex VAT
Aluminium Quick Dry Enamel
£42.00 – £120.00 ex VAT
Aluminium Quick Dry Enamel with a tough, quick drying finish. A metal paint made with high grade aluminium flake, rather than pigment, which is dissolved in solvent for 24 hours and diluted with urethan alkyd. Heat resistant up to 150 degrees C. Steel-grey in finish. Typically used to refurbish truck wheels. Advisable to spray. Never use a roller with this product.
Description
Aluminium Quick Dry Enamel – Product Description & Recommended Use
- A single-pack, quick-air-drying aluminium-flake enamel topcoat with a tough, steel-grey sheen finish.
- This metal paint is made from high-quality synthetic resins and premium grade aluminium flake.
• Ideally applied by airless or conventional spray but can be brushed where necessary. Rolling not recommended.
• Suitable for direct-to-metal applications (typical use is to refurbish truck wheels).
• Suitable for application to steel and non-ferrous metal, and heavy-duty industrial use.
• For higher temperatures, we recommend thin films to reduce the risk of thermal-shock cracks of the paint-film during heating and cooling cycles.
Technical Details
[row]
[col span__sm=”12″]
[block id=”25163″]
[/col]
[/row]
Additional information
| Weight | N/A |
|---|---|
| Select Size |
5 Litres ,20 Litres |
Shipping & Delivery
WE AIM TO DISPATCH ORDERS RECEIVED PRE-NOON ON THE SAME DAY (STOCK DEPENDENT)
ALL ORDERS SENT ON A NEXT WORKING-DAY SERVICE
FREE DELIVERY ON ALL ORDERS OVER £300*
*£300 NET. Excludes surcharge areas - delivery surcharge will still apply.
You may also like…
Nylon Bonded Roller Refills
Black-Stripe Nylon material is heat-bonded to the nylon core in manufacture. Ideal for painting floors, the nylon core is solvent resistant and the Nylon fabric is virtually fluff-free in use. This makes this type of roller refill ideal for use with epoxy resin floor paint and other solvent based coatings that would pull fluff from or disolve most other roller refills. Available in four sizes: 9", 12", 15" & 18" wide.
Steel Roller Frames
Steel Roller Frames - These floor roller frames are made from high strength galvanised steel, and available in 9" (Alloy), 12", 15" & 18". The Roller frame bar is secured with a split-pin allowing easy removal.
Related products
Agricultural Oxide
Agricultural Oxide - A long oil based protective metal coating, suitable for all types of interior/exterior substrates. It has excellent covering power and can be used on block work, steel sheets, asbestos sheeting as well as wood. It has a good gloss finish, gives protection against weathering and corrosion.
Anticorrosive High Build Phosphate Quick Dry Primer
Anticorrosive High Build Phosphate Quick Dry Primer is a single pack priming solution suitable for most metal substrates. This metal paint is also suitable for pre-treated aluminium and galvanised steel. High Build Phosphate Quick Dry Primer gives excellent protection against corrosion. Excellent build levels and can be re-coated in most types of finish.
- Coverage: 5 m² per litre
- Touch Drying Time: 30 mins - 1 hr
- Recoat: 12 hrs
- Hard Drying Time: 24 hrs
Plywood Paint / MDF Paint
Plywood Paint / MDF Paint - A tough, long lasting, fast drying gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat.
- Coverage: 5-10 m² per litre
- Touch Drying Time: 3-6 hours
- Recoat: 16 hours
- Hard Drying Time:Â 48 hours
Quick Drying Gloss Enamel
Quick Drying Gloss Enamel - Enamel Paint - A tough, long lasting, fast drying metal paint with a gloss finish made on a high build alkyd. High impact resistance, compatible with most primers or as a single coat. Can be used for a variety of applications as diverse as machinery paint, skip paint, shipping container paint and tractor paint.
- Coverage: 5-10 m² per litre
- Touch Drying Time: 3-6 hours
- Recoat: 16 hours
- Hard Drying Time:Â 48 hours
Slate Grey Masonry Paint
A new addition to our range of exterior masonry paint colours.
Regal Slate Grey Masonry Paint is a water borne (water based) masonry paint with a smooth sheen finish. Based on acrylic resin. Excellent covering power and opacity.
We add plenty of biocides to give long lasting protection to exterior walls, guarding against weather damage. Can also be used to paint internal brick and concrete walls of industrial units, commercial units, factories, garages etc.
Competitively priced, this is a lovely dark grey masonry paint made in our factory in Stoke-on-Trent.
Sold in 20 litre cans. Also available in white and magnolia. Bespoke colours can be made for orders over 200 litres. Please contact us for more details.
Two Pack Epoxy Floor Paint (Top Coat)
Two Pack Epoxy Floor Paint (Top Coat) - This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks).
Following application of the product:
Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours
Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration)
- Coverage: 5-7 m² per litre
- Touch Drying Time: 12-16 hrs
- Recoat: 24 hrs
- Hard Drying Time:48 hrs
- Full Cure: 7 days
Pumice Aggregate
Floor Paint, Anti-Slip Floor Paint, High Build Floor Paint, Concrete Floor Paint, Epoxy Floor Paint, Garage Floor Paint, Metal Top Coat Paint, One Coat Paint, Tools and Extras, Anti Slip Additives
Pumice aggregate is an extremely lightweight natural material which is mixed into the paint prior to application.
It gives a rough-profiled finish and significantly increases slip resistance.
When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. Apply the paint with a roller to achieve a consistent finish.
A natural stone alternative to plastic microbeads.
