Epoxy Primer
Anticorrosive High Build Phosphate Quick Dry Primer
Red Oxide Primer and Paint
Agriculture Oxide (Barn Paint)
Aluminium Quick Dry Enamel
Decorative Gloss
One Coat Steel Enamel
Quick Drying Gloss Enamel
Skip Paint / Container Paint
Brunswick Green Metal Paints
Ford Tractor Blue Metal Paints
Cornflower Blue Metal Paints
Red Oxide Metal Paints
Post Office Red Metal Paints
Caterpillar Yellow Metal Paints
JCB Yellow Metal Paints
Chocolate Brown Metal Paints
Bright Orange Metal Paints
Slate Grey Metal Paints
Light Grey Metal Paints
White Metal Paints
Black Metal Paints
Basement Floor Paint
Catteries Paint
Car Park Paint
Commercial Kitchen Paint
Corridor Paint
Corrugated Iron Paint
Dog Kennel Floor Paint
Gallery Floor Paint
Heavy Traffic Area Paint
Hospitals Paint
Laundry Room Paint
Machinery Paint
Mezzanine Floor Paint
Museums Paint
Oil Rigs Paint
Restaurant Paint
Shop Floor Paint
Shipping Containers Paint
Stable Paint
Stadium Floor Paint
Steel Bridge Paint
Storage Room Paint
Studio Floor Paint
Timber Paint
Tractors Paint
Trailer Paint
Walkways Paint
Shop
Line Marking Paint
Line Marking Paint - A quick drying floor paint used to mark out safe zones, work areas, walkways, hazard areas etc on your floor. A durable coating with good resistance to abrasion and impact along with with protection against solvent, salt and water damage. Ideally suited to factory floors, warehouses, service garages, car parks and other industrial areas where long lasting and clearly visible markings are required. Available in five colours.
Select options
This product has multiple variants. The options may be chosen on the product page
Regal Clear Finish
Regal Clear Finish is ideal as a finishing coat over our epoxy or single pack floor paints to enhance gloss levels. A 2-pack acrylic which is fast drying and has excellent hardness. To be applied very thinly.
Select options
This product has multiple variants. The options may be chosen on the product page
Aluminium Quick Dry Enamel
Aluminium Quick Dry Enamel with a tough, quick drying finish. A metal paint made with high grade aluminium flake, rather than pigment, which is dissolved in solvent for 24 hours and diluted with urethan alkyd. Heat resistant up to 150 degrees C. Steel-grey in finish. Typically used to refurbish truck wheels. Advisable to spray. Never use a roller with this product.
Select options
This product has multiple variants. The options may be chosen on the product page
Parlour Paint
Milking Parlour Wall Paint - Designed for it’s resistance to moisture and industrial pollution, and is also extremely resistant to chemicals, acids and alkaline. Parlour paint is ideal for areas kept hygienically clean by jet washing and detergents. This is based on a chlorinated rubber, halogenated hydrocarbon resin, giving a semi-gloss finish.
- Coverage: 5m² per litre
- Touch Drying Time: 6hrs
- Recoat: 24 hrs
- Hard Drying Time: 48 hrs
Select options
This product has multiple variants. The options may be chosen on the product page
Two-Pack Epoxy Metal Primer (First Coat)
Two-Pack Epoxy Metal Primer - Designed for a wide range of metal substrates, our two pack epoxy primer offers excellent durability and resistance to contact with solvents, acids, alkalis and salts. It’s hardwearing surface gives good protection against corrosion due to it’s phosphate content. Two-Pack Epoxy Metal Primer is suitable for galvanised steel and aluminium.
- Coverage: 5-10 m² per litre
- Touch Drying Time: 12 hrs
- Recoat: 24 hrs
- Hard Drying Time: 48 hrs
- Full Cure: 7 days
Select options
This product has multiple variants. The options may be chosen on the product page
Two-Pack Epoxy Floor Sealer (First Coat)
Two-Pack Epoxy Floor Sealer (Under Coat) - This epoxy floor paint (first coat) is designed to prepare the surface of concrete, cement and non ferrous metals. This gives an ideal base for epoxy topcoat or acts as a seal coat for bare concrete floors. Resistant to water, solvents, acids, alkalis and salts. Tough finish, and has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks).
Following application of the product:
Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours
Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration)
- Coverage: 5-7 m² per litre
- Touch Drying Time: 12-16 hrs
- Recoat: 24 hrs
- Hard Drying Time: 48 hrs
- Full Cure: 7 days
Select options
This product has multiple variants. The options may be chosen on the product page
White Masonry Paint
Our White Masonry Paint is a water borne (water based) masonry paint with a smooth sheen finish. Based on acrylic resin. Excellent covering power with long lasting protection to exterior walls, guarding against weather damage. Can also be used to paint internal brick and concrete walls of industrial units, factories etc.
Sold in 20 litre cans and also available in Magnolia. Bespoke colours can be made for orders over 200 litres. Please contact us for more details.
Magnolia Masonry Paint
Regal Magnolia Masonry Paint is a water borne (water based) masonry paint with a smooth sheen finish. Based on acrylic resin. Excellent covering power with long lasting protection to exterior walls, guarding against weather damage. Can also be used to paint internal brick and concrete walls of industrial units, factories etc.
Sold in 20 litre cans. Also available in white. Bespoke colours can be made for orders over 200 litres. Please contact us for more details.
Slate Grey Masonry Paint
A new addition to our range of exterior masonry paint colours.
Regal Slate Grey Masonry Paint is a water borne (water based) masonry paint with a smooth sheen finish. Based on acrylic resin. Excellent covering power and opacity.
We add plenty of biocides to give long lasting protection to exterior walls, guarding against weather damage. Can also be used to paint internal brick and concrete walls of industrial units, commercial units, factories, garages etc.
Competitively priced, this is a lovely dark grey masonry paint made in our factory in Stoke-on-Trent.
Sold in 20 litre cans. Also available in white and magnolia. Bespoke colours can be made for orders over 200 litres. Please contact us for more details.
Two-Pack Epoxy Metal Enamel (Top Coat)
A two-Pack (or two-part) epoxy paint for metal, a topcoat enamel which is designed to be used in conjunction with Regal epoxy primer for application to most metal substrates. This epoxy metal paint has excellent durability and impact resistance. Offers protection from solvents, acids, alkalis and salts.
- Coverage: 5-10 m² per litre
- Touch Drying Time: 12 hrs
- Recoat: 24 hrs
- Hard Drying Time:48 hrs
- Full Cure: 7 days
Select options
This product has multiple variants. The options may be chosen on the product page
High Build Epoxy Garage Floor Paint
Two Pack High Build Epoxy Garage Floor Paint - Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle / trucks).
- Coverage: 5-7 m² per litre
- Touch Drying Time: 12-16 hrs
- Recoat: 24 hrs
- Hard Drying Time: 48 hrs
- Full Cure: 7 days
Select options
This product has multiple variants. The options may be chosen on the product page
Two Pack Epoxy Floor Paint (Top Coat)
Two Pack Epoxy Floor Paint (Top Coat) - This epoxy floor coating is designed for application to concrete, cement and non ferrous metals. It provides excellent resistance to water, solvents, acids, alkalis and salts and gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks).
Following application of the product:
Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours
Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration)
- Coverage: 5-7 m² per litre
- Touch Drying Time: 12-16 hrs
- Recoat: 24 hrs
- Hard Drying Time:48 hrs
- Full Cure: 7 days
Select options
This product has multiple variants. The options may be chosen on the product page
