Epoxy Primer
Anticorrosive High Build Phosphate Quick Dry Primer
Red Oxide Primer and Paint
Agriculture Oxide (Barn Paint)
Aluminium Quick Dry Enamel
Decorative Gloss
One Coat Steel Enamel
Quick Drying Gloss Enamel
Skip Paint / Container Paint
Brunswick Green Metal Paints
Ford Tractor Blue Metal Paints
Cornflower Blue Metal Paints
Red Oxide Metal Paints
Post Office Red Metal Paints
Caterpillar Yellow Metal Paints
JCB Yellow Metal Paints
Chocolate Brown Metal Paints
Bright Orange Metal Paints
Slate Grey Metal Paints
Light Grey Metal Paints
White Metal Paints
Black Metal Paints
Basement Floor Paint
Catteries Paint
Car Park Paint
Commercial Kitchen Paint
Corridor Paint
Corrugated Iron Paint
Dog Kennel Floor Paint
Gallery Floor Paint
Heavy Traffic Area Paint
Hospitals Paint
Laundry Room Paint
Machinery Paint
Mezzanine Floor Paint
Museums Paint
Oil Rigs Paint
Restaurant Paint
Shop Floor Paint
Shipping Containers Paint
Stable Paint
Stadium Floor Paint
Steel Bridge Paint
Storage Room Paint
Studio Floor Paint
Timber Paint
Tractors Paint
Trailer Paint
Walkways Paint
Shop
Two-Pack Epoxy Floor Sealer (First Coat)
Two-Pack Epoxy Floor Sealer (Under Coat) - This epoxy floor paint (first coat) is designed to prepare the surface of concrete, cement and non ferrous metals. This gives an ideal base for epoxy topcoat or acts as a seal coat for bare concrete floors. Resistant to water, solvents, acids, alkalis and salts. Tough finish, and has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle/trucks).
Following application of the product:
Do not park vehicles or place heavy equipment on the floor for a minimum of 48 hours
Do not get the floor wet for a minimum of 7 days as this will cause bloom (discolouration)
- Coverage: 5-7 m² per litre
- Touch Drying Time: 12-16 hrs
- Recoat: 24 hrs
- Hard Drying Time: 48 hrs
- Full Cure: 7 days
Clean n Etch
Clean n Etch - This acid etch product is made for very smooth / power floated floors or dirty floors. Clean n Etch is a highly concentrated blend of non-fuming acidic compounds and cleaning agents, specifically developed to prepare concrete floors prior to applying paints and other protective coatings.
Clean n Etch, Rollers and Brushes Bundle
Pack includes:
1 x Clean n Etch
1 x 15" Roller Frame
1 x 15" Roller Head
2 x 4" brushes
1 x mixer paddle
This is the basic starter pack for painting a floor. It contains all the tools you will need to get the job done.
Clean n Etch Bundles - floor preparation and paint application.
High Build Epoxy Garage Floor Paint
Two Pack High Build Epoxy Garage Floor Paint - Designed for application to concrete, cement and non ferrous metals. Excellent resistance to water, solvents, acids, alkalis and salts. Gives superb adhesion to all recommended substrates. Tough finish has long lasting abrasion and impact resistance. Recommended for areas receiving heavy traffic (vehicle / trucks).
- Coverage: 5-7 m² per litre
- Touch Drying Time: 12-16 hrs
- Recoat: 24 hrs
- Hard Drying Time: 48 hrs
- Full Cure: 7 days
Pumice Aggregate
Floor Paint, Anti-Slip Floor Paint, Concrete Floor Paint, Epoxy Floor Paint, Garage Floor Paint, High Build Floor Paint, Metal Top Coat Paint, Anti Slip Additives, One Coat Paint, Tools and Extras
Pumice aggregate is an extremely lightweight natural material which is mixed into the paint prior to application.
It gives a rough-profiled finish and significantly increases slip resistance.
When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. Apply the paint with a roller to achieve a consistent finish.
A natural stone alternative to plastic microbeads.
Clean and Degrease
A heavy duty, low odour degreasing detergent. Specially formulated for the removal of grease, oils, fats and stubborn deposits from floors, walls, machinery, paintwork and other hard surfaces. Ideal for preparing your floor ready for a first coat. Used by floor contractors to clean concrete prior to painting. Suitable for the engineering industry, food handling sector, offices, shops, hotels and many other areas where regular cleaning is required. A biodegradable, low caustic, low odour, non-solvent cleaner. It can also be used as an ongoing maintenance product to remove foot and tyre marks from painted floors.
Skip and Container Paint
Regal Skip and Container Paint - Made in our factory, this product is a tough, long lasting, fast drying, semi-gloss primer finish made on a high build alkyd resin. Using Skip and Container paint eliminates the need for two coats and cuts the drying time between coats, reducing labour and paint costs. Enhanced with calcium phosphate, with excellent anticorrosive properties, Regal Skip and Container Paint protects against corrosion and impacts.
SuperTough Aggregate
Floor Paint, Anti-Slip Floor Paint, Concrete Floor Paint, Epoxy Floor Paint, Garage Floor Paint, High Build Floor Paint, Anti Slip Additives, Tools and Extras
SuperTough Aggregate is an iron-silicate grit. With much larger particles than our Pumice Aggregate, it has a hard, sharp finish to give fantastic grip when used in conjunction with our floor paints.
To use SuperTough Aggregate, firstly apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, use a soft brush to remove the excess SuperTough Aggregate that hasn’t stuck. Then paint over the whole surface of the floor again to seal the grit in place on the floor.
Anticorrosive High Build Phosphate Quick Dry Primer
Anticorrosive High Build Phosphate Quick Dry Primer is a single pack priming solution suitable for most metal substrates. This metal paint is also suitable for pre-treated aluminium and galvanised steel. High Build Phosphate Quick Dry Primer gives excellent protection against corrosion. Excellent build levels and can be re-coated in most types of finish.
- Coverage: 5 m² per litre
- Touch Drying Time: 30 mins - 1 hr
- Recoat: 12 hrs
- Hard Drying Time: 24 hrs
Antislip Quick Dry Concrete Floor Paint
Anti Slip Quick Dry Concrete Floor Paint is a made with the addition of a wax additive to give more slip resistance to your floor. This is a single pack paint (does not need an activator) and gives protection against solvent, salt and water damage. Having good durability and impact resistance, it is suitable for use in heavy duty commercial and industrial areas.
– Coverage: 5-10 m² per litre
– Touch Drying Time: 3-6 hours
– Recoat: 24 hours
– Hard Drying Time: 48 hours
