[block id=”top-preparation-finishing-aftercare”]
[row]
[col span=”9″ span__sm=”12″]
[row_inner]
[col_inner span__sm=”12″]
[gap]
[title text=”OUR FLOOR PREPARATION, FINISHING AND AFTERCARE PRODUCTS”]
Pumice Aggregate
Floor Paint, Anti-Slip Floor Paint, High Build Floor Paint, Concrete Floor Paint, Epoxy Floor Paint, Garage Floor Paint, Metal Top Coat Paint, One Coat Paint, Tools and Extras, Anti Slip Additives
Pumice aggregate is an extremely lightweight natural material which is mixed into the paint prior to application.
It gives a rough-profiled finish and significantly increases slip resistance.
When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. Apply the paint with a roller to achieve a consistent finish.
A natural stone alternative to plastic microbeads.
Select options
This product has multiple variants. The options may be chosen on the product page
SuperTough Aggregate
Floor Paint, Anti-Slip Floor Paint, High Build Floor Paint, Concrete Floor Paint, Epoxy Floor Paint, Garage Floor Paint, Tools and Extras, Anti Slip Additives
SuperTough Aggregate is an iron-silicate grit. With much larger particles than our Pumice Aggregate, it has a hard, sharp finish to give fantastic grip when used in conjunction with our floor paints.
To use SuperTough Aggregate, firstly apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, use a soft brush to remove the excess SuperTough Aggregate that hasn’t stuck. Then paint over the whole surface of the floor again to seal the grit in place on the floor.
Select options
This product has multiple variants. The options may be chosen on the product page
Clean and Degrease
A heavy duty, low odour degreasing detergent. Specially formulated for the removal of grease, oils, fats and stubborn deposits from floors, walls, machinery, paintwork and other hard surfaces. Ideal for preparing your floor ready for a first coat. Used by floor contractors to clean concrete prior to painting. Suitable for the engineering industry, food handling sector, offices, shops, hotels and many other areas where regular cleaning is required. A biodegradable, low caustic, low odour, non-solvent cleaner. It can also be used as an ongoing maintenance product to remove foot and tyre marks from painted floors.
Clean n Etch
Clean n Etch - This acid etch product is made for very smooth / power floated floors or dirty floors. Clean n Etch is a highly concentrated blend of non-fuming acidic compounds and cleaning agents, specifically developed to prepare concrete floors prior to applying paints and other protective coatings.
Regal Clear Finish
Regal Clear Finish is ideal as a finishing coat over our epoxy or single pack floor paints to enhance gloss levels. A 2-pack acrylic which is fast drying and has excellent hardness. To be applied very thinly.
Select options
This product has multiple variants. The options may be chosen on the product page
[block id=”24813″]
[/col_inner]
[/row_inner]
[/col]
[col span=”3″ span__sm=”12″]
[ux_sidebar id=”shop-sidebar”]
[/col]
[/row]
