- Epoxy Floor Paint
- Single Pack Floor Paint
- Preparation, Finishing
& Aftercare - Floor Paint Applications
- Floor Paint Colours
- Brunswick Green Floor Paints
- Ford Tractor Blue Floor Paints
- Cornflower Blue Floor Paints
- Red Oxide Floor Paints
- Post Office Red Floor Paints
- Caterpillar Yellow Floor Paints
- JCB Yellow Floor Paints
- Chocolate Brown Floor Paints
- Bright Orange Floor Paints
- Slate Grey Floor Paints
- Light Grey Industrial Floor Paints
- White Floor Paints
- Black Industrial Floor Paints
Nylon Bonded Roller Refills
£6.10 – £11.95 ex VAT
Polyurethane Concrete Floor Paint
£31.50 – £82.00 ex VAT
Paint Mixer Drill Attachment
£9.80 ex VAT
Paint Mixer – Ideal for mixing paint, adhesives, grout, mortar, cement and most liquid materials. This is drill attachment for mixing paint and can be used with most power drills. You must fully immerse the mixer paddle in the liquid before use.
Stirrer-head size: 103mm x 80mm
Length: Approx 40cm
Description
We always recommend the use of a mechanical paint mixer to mix our paint. Please don’t mix industrial paint by hand or by using something such as a stick as it will not work properly. This is a mixing paddle which can be used with most power drills. Ensure the paint mixer is fully immersed in the liquid before use.
Additional information
Shipping & Delivery
Related products
Nylon Bonded Roller Refills
Black-Stripe Nylon material is heat-bonded to the nylon core in manufacture. Ideal for painting floors, the nylon core is solvent resistant and the Nylon fabric is virtually fluff-free in use. This makes this type of roller refill ideal for use with epoxy resin floor paint and other solvent based coatings that would pull fluff from or disolve most other roller refills. Available in four sizes: 9", 12", 15" & 18" wide.
Steel Roller Frames
Steel Roller Frames - These floor roller frames are made from high strength galvanised steel, and available in 9" (Alloy), 12", 15" & 18". The Roller frame bar is secured with a split-pin allowing easy removal.
Pumice Aggregate
Floor Paint, Anti-Slip Floor Paint, High Build Floor Paint, Concrete Floor Paint, Epoxy Floor Paint, Garage Floor Paint, Metal Top Coat Paint, One Coat Paint, Tools and Extras, Anti Slip Additives
Pumice aggregate is an extremely lightweight natural material which is mixed into the paint prior to application.
It gives a rough-profiled finish and significantly increases slip resistance.
When using, pour the pumice into the paint and mix thoroughly. After mixing, use the paint immediately. Apply the paint with a roller to achieve a consistent finish.
A natural stone alternative to plastic microbeads.
SuperTough Aggregate
Floor Paint, Anti-Slip Floor Paint, High Build Floor Paint, Concrete Floor Paint, Epoxy Floor Paint, Garage Floor Paint, Tools and Extras, Anti Slip Additives
SuperTough Aggregate is an iron-silicate grit. With much larger particles than our Pumice Aggregate, it has a hard, sharp finish to give fantastic grip when used in conjunction with our floor paints.
To use SuperTough Aggregate, firstly apply a coat of floor paint and then liberally scatter the grit over the surface of the wet paint. Allow the floor to dry for a full 24 hours. Once dry, use a soft brush to remove the excess SuperTough Aggregate that hasn’t stuck. Then paint over the whole surface of the floor again to seal the grit in place on the floor.
